Odštampaj stranicu - Slika iz linux-a na TV

Naime uzeo sam stari komp i hocu na njega da stavim linux i da ga prikacim na tv preko skarta i da mi on izigrava dvd player (nesto vec u tom fazonu) . Ali prebacivanje slike sa kompa na tv mi bas i ne ide, prvo sam probao sa dream linux-om najnovijom verzijom i nasao opciju kada sam instalirao drivere za nvidia graficku kartu da prebaci sliku na tv , ali nije radilo. Onda sam instalirao Mandrivu 2007 , ali jedino sto sam nasao za prebacivanje slike na tv jeste bilo u setovanju za graficku (geforce 2) , nazalost driveri koji su dosli uz mandrivu nisu radili , nije mogao da pokrene ni x.org , a kamoli nesto vise , kada sam skinuo nvidiene drivere i proba da ih instaliram nisam uspeo jer mi je kukao nesto oko kernel sourca , stavio sam sve sto sam nasao vezano za njih na dvd na sistem ali i dalje nije radilo. Da li neko ima ideju kako da prebaci sliku za kompa na tv i da li to moram da sredim u driverima za graficku ili mozda ima neki program koji radi taj posao ?

Što se tiče prikaza na TV-u moraš da posesiš TwinView opciju za svoju graf.karticu ali pre toga instaliraj orginalni NVIDIA drajver. Doduše moguće je koristiti i Xineramu. Podešavanja za obe varijante možeš kreirati preko nvidia-xconfig alatke ili editovanjem xorg.conf fajla.

Evo kako bi fajl otprilike trebao da izgleda za TwinView:

Kod:

Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Acer AL1715"
DisplaySize 340 270
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "CoolBits" "1"
Option "TwinView" "True"
Option "TwinViewOrientation" "RightOf"
Option "UseEdidFreqs" "True"
Option "MetaModes" "1280x1024, 1280x1024"
Option "SecondMonitorHorizSync" "24.0 - 80.0"
Option "SecondMonitorVertRefresh" "49.0 - 75.0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

a evo kako za Xineramu:

Kod:

Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Acer AL1715"
DisplaySize 340 270
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Acer AL1715"
DisplaySize 340 270
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "nvidia"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

mada možeš jednostavno koristiti jedan uređaj za prikaz (recimo TV) kada gledaš film. U tom slučaju bi trebalo biti dovoljno da isključiš kabl za monitor i podigneš sistem sa s-video ili kompozitnim priključkom.

Linuxo Forumi

Mandriva (Mandrake) Linux => Softver => Temu započeo: Puppet_Master 07 Април 2007, 14:50:19