Linuxo Forumi

Pozdrav.
Gde da nadem driver za modem agere systems PCI soft modem?
nigde ne mogu da nadem codec za mp3, DVD , mp4. Gde mogu to naci?
Unapred hvala. :biggrin:

Drajver se zove martian, pretraži ovaj forom s tim kriterijumom. Za ostalo takođe pretraži forum (multimedia)...

ili pogledaj ovde

www.ubuntu-rs.org

samo nemoj mnogo da se zadrzavas tamo, bice ti i ovde dobro  O0  salim se, naravno.

Drajver imas ovde     http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
Skini martian-full-20071011.tar.gz :)

Hvala na pomoc, nasao sam.ali izgleda da nisam toliko pametan da instaliram. :redface:  Ako neko zna da nudi pomoc, ja bi zamolio da to meni objasni kako to da instaliram na ubuntu 7.10. ???

ovde je generalno za dial-up modeme sa ubuntu-om (bitno je dole 'Configure Connection to ISP' )
https://help.ubuntu.com/community/DialupModemHowto

konkretno za martian je na sledecoj stranici
 lucent ali pomocu martian  (https://help.ubuntu.com/community/DialupModemHowto/Lucent#head-5fdd11a887b7b839bc6807ed18969c5ed6200997) drajvera

da bi se ovo napravilo ,mislim da je potreban paket za kompajliranje
trebalo bi da se ono osnovno za kompajliranje nalazi na cd-u 7.10
posto pretpostavljam da trenutno nemas pristup netu direktno sa ubuntu-a
(ne znam bas tacno za ubuntu  ima valjda build-essentials ili tako nesto,
na  ubuntu-rs.org ima vise informacija)

ovde je u stvari
https://help.ubuntu.com/community/DialupModemHowto/FromSource
    build-essential    linux-headers-*odgovarajuci*
ali ne mora bas da se prati ovo 'from source' uputstvo ,jer je na 7.10
naj jednostavnije pomocu synaptic-a da se ova dva paketa instaliraju
kad pustis synaptic ,tamo u njemu pronadji source:cd i cekiraj ova dva paketa
i idi na apply,i posle toga kad njih instalira onda mozes da nastavis sa daljom
instalacijom ovih martian drajvera

=================
    Building
=================

In root directory run
$ make all

==================
   Installation
==================

In root directory run
$ su
# make install
Kod driver-a ovaj gornji text pise u install.txt fajlu.
Kad upisem u root directory ovo:
root@slyder-desktop:/home/slyder# make install

izbacuje sledeci text:
make: *** No rule to make target `install'.  Stop.

ili sam ja baksuz ili mozda nisam dobar driver skinuo!?
nasao sam martian-full-20071011.tar.gz, jel ovaj driver dobro je za ubuntu 7.10 (gutsy)kernel Linux 2.6.22-14-generic  GNOME 2.20.0?
 

to je najnoviji drajver,valjda ce da radi na kernelu v2.6.22
nisam isprobavao ,probacu da na ubuntu forumu(globalnom) nadjem thread za ovo
jer obicno azuriraju vesti o tome da li ovi drajveri rade na novijim verzijama linuxa

kada odpakujes arhivu (desni klik pa 'unpack with packager' )
pojavice se pod-direktorijum u home direktorijumu koji se zove martian-full-20071011
(mislim da si vec odpakovao)

komanda 'make' ili 'make all'sluzi za kompiliranje drajvera
posto u uputsvu kaze da treba  make all onda
 
prvo predjes u ovaj poddirektorijum , pomocu
pa onda
posle ovoga ,posalji listing da bi videli da li je ispala neka greska ili je proslo
regularno(okaci ga kao prilog sa .txt ekstenzijom)

ako je bilo bez problema onda
za samu instalaciju treba da imas super-user privilegije
a to se na ubuntu postize kucanjem    'sudo'  ispred neke komande ,znaci:

(posle ovoga ne znam tacno sta dalje,moram da pogledam ili da
javi ko je instalirao martian na nekom racunaru
ili da citamo dalje readme?)

Covek ima Agere-pitanje je da li ce modem uopste da mu radi jer nisu podrzani svi cipsetovi ^-^
Treba prvo da odradis scan modem i da nam kazes sta ti je rekao/izbacio a ovde imas uputstvo kako se to radi http://linmodems.technion.ac.il/#scanModem  ;)
Drajver btw radi(jos sam koristio prethodnu verziju  :D)sa novijim kernelima bez problema-recimo na  Fedori 7 koja ima 2.6.21 ako se ne varam

koristio sam scenmodem.evo je rezultat:

             

      Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html
 Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
 scanModem update of:  2007-20-07
The modem symbolic link is /dev/modem -> ttySL0

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
 snd_atiixp_modem
snd_via82xx_modem
snd_intel8x0m


The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.


 Modem not detected though HDA card diagnostics, though not excluding
 a possible Conexant modem chip impervious to ALSA diagnostics.
 Proceeding through alternative possibilties.

Summary card and chipset information is in:
/proc/asound/cards:
 0 [V8235          ]: VIA8233 - VIA 8235
                      VIA 8235 with AD1980 at 0xe000, irq 18

/proc/asound/pcm:
00-01: VIA 8235 : VIA 8235 : playback 1 : capture 1
00-00: VIA 8235 : VIA 8235 : playback 4 : capture 1

 A copy of /proc/asound had been copied to Modem/ALSAslyder.tgz
USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:0d.0   11c1:048c   11c1:044c   Communication controller: Agere Systems V.92 56K WinModem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 00:0d.0 ----

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


There is candidate modem software.

 For candidate modem in PCI bus:  00:0d.0
   Class 0780: 11c1:048c Communication controller: Agere Systems V.92 56K WinModem
      Primary PCI_id  11c1:048c
 Support type needed or chipset:   Agere.SV2P
 


 Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux  code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
 continued maintenance is only initiated at the request of a major chipset buyer,
 or comparable sponsor. Several different  modem chipset types  are produced:
 with varying support under Linux.
 Device ID  Support        Name           Comment
 ---------  -------------  -----------    -----------------------------
 0480       serial drivers Venus           controller chipset 1673JV7
 0440-045d  martian        Mars/Apollo     DSP (digital signal processing) chipsets
 0462       none           56K.V90/ADSL Wildwire
 048d none                 SV2P            soft modem
 048(c or f) AGRSM         SV2P            soft modem
 0600       none           soft modem, very few in the field.
 0620       AGRSM          Pinball  soft modem, in some HP desktop PCs
 062(1-3)   none           SV92PP,Pinball  soft modem, in some HP desktop PCs

martian - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/

AGRSM - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ Read Agrsm.txt
Read Agrsm.txt
-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2007-12-04 20:10 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
ltmodem
ltmodem
--------- end modem support lines --------

evo je kompéetan istall.txt

=================
    Building
=================

In root directory run
$ make all


==================
   Installation
==================

In root directory run
$ su
# make install


==============
   Running
==============

Load module and run martian_modem first.
# modprobe martian_dev
# martian_modem [Options] [Tty]

Now Tty is the name of the device file to represent your modem. You'll supply it to the dialer. /dev/ttySM0 if argument omitted. Left martian_modem running and start the dialer.

See options available
# martian_modem --help
 

==============
     Auto
==============

In scripts/ directory run automate.sh.
$ cd scripts/
$ ./automate.sh

You can supply the option to be passed to martian_modem on loading like
$ ./automate --mode 0660

See ./automate.sh --help for more options.


==============
    Notes
==============

'martian_modem' program is a crucial part of the driver. It should be running as long as you access the modem.

For technical reasons carrier status support is not available for the modem client. Configure dialer respectively. For wvdial add "Check Carrier = No" line to the configuration file.


x86_64 platform.
----------------

martian_modem is a 32-bit application. It can be built on x86_64 the way prescribed, but you need 32-bit development environment for that. Second option is to use binary built on i386.

To compile and install module only do
$ make -C kmodule/ modules
$ su
# make -C kmodule/ install

nesto sam uspeo al jos ne radi.evo i to dokle sam stigao

slyder@slyder-desktop:~$ cd /home/slyder/Munkaasztal/martian-full-20071011
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ make all
make -C kmodule/ modules
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C /lib/modules/2.6.22-14-generic/build M="/home/slyder/Munkaasztal/martian-full-20071011/kmodule"  modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.o
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c: In function ‘martian_isr’:
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:160: warning: value computed is not used
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c: In function ‘martian_add’:
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:660: warning: ‘deprecated_irq_flag’ is deprecated (declared at include/linux/interrupt.h:66)
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:660: warning: ‘deprecated_irq_flag’ is deprecated (declared at include/linux/interrupt.h:66)
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:663: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/marsio.o
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/mfifo.o
  LD [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.mod.o
  LD [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.ko
make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C modem/ all
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
-e     CC       main.o
-e     CC       dumpers.o
-e     CC       log.o
-e     CC       session.o
-e     CC       mport.o
-e     CC       pty.o
-e     CC       sysdep.o
-e     CC       isr.o
-e     CC       smp.o
-e     CC       core_if.o
-e     CC       coresubst.o
-e     CC       link.o
-e     CC       tweakrelocsdynamic.o
-e     CC       coreadd.o
-e     CC       elf386tweakrelocs
-e     LD       marscore.o
-e     TWEAK    marscore.o
-e     LD       martian_modem
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ sudo make install
[sudo] password for slyder:
make -C kmodule/ install
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C /lib/modules/2.6.22-14-generic/build M="/home/slyder/Munkaasztal/martian-full-20071011/kmodule" modules_install
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  INSTALL /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.ko
  DEPMOD  2.6.22-14-generic
make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
if ! /sbin/modprobe -nq martian_dev ; then /sbin/depmod -a; fi
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C modem/ install
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
-e     LD       martian_modem.debug
-e     STRIP    martian_modem.debug
-e     STRIP    martian_modem.stripped
-e     INSTALL  /usr/sbin/martian_modem
-e     INSTALL  /usr/lib/debug/usr/sbin/martian_modem.debug
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ modprobe martian_dev
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$  martian_modem --help
Usage: martian_modem [Options] [TTY]
Options:
   --daemon             Run as daemon
   --log=FILE           Log to FILE
   --syslog             Use syslog for logging
   --realtime           Raise priority of threads to realtime
   --isr={kernel,core,user}     Use original isr or its implementations
                          `kernel' to serve irqs in kernel module by rewriten isr
                          `core' for original isr version linked into this program
                          `user' for low-level statistics and testing of rewriten isr
                          `kernel' is default
   --smp                True smp mode
   --user=<name>        Give tty ownership to user <name>
   --group=<name>       Change tty group to <name>
   --country=<country>
   --no-cdclose         Keep working with client when carrier lost.
   --hide-pty           Save pty from others as soon its open. Client should notify he's here writing to device. For callback feature.
   --debug=LEVEL        Enable debugging. LEVEL = 1..5
   --info countries     Print support info
   --help, --usage      Print this message
TTY is the file name to access the modem, /dev/ttySM0 by default

ovako kompiliranje je izgleda dobro proslo O0
sad je potrebno podesenje konekcije(postoje dialeri ,kppp wvdial gnome-ppp)
ali na ubuntu ,bez prethodne instalacije sa neta moze da se koristi ugradjeni:
start dial-up bez dodatnog softwera (https://help.ubuntu.com/community/DialupModemHowto/SetUpDialer#head-f5120acdc3ef62fe7d37bfd3f0c9157ebe9c8ef6)
(ovu stranicu snimi odmah jer je http-secure i kad se zatvori prozor browser je obrise)

otvori dve-tri konzole
prvo treba da se ucita drajver
 zatim u drugoj,posebnoj konzoli
 
ovaj program treba da stalno radi u pozadini dok zelis da koristis modem
postoji opcija --daemonize ,ali prvo da ovako testiramo
bez dodatnih prametara default uredjaj koga napravi je    /dev/ttySM0 i ovo je potrebno u sledecem
koraku
ne znam tacno da li mu treba sudo?

nego jel moze da probamo pomocu
 alternativnog nacina?  (https://help.ubuntu.com/community/DialupModemHowto/SetUpDialer#head-0769b0061bf81bfba710118540bd86223e815761)
treba da znas : telefonski broj provajdera ,lozinku i /dev/ttySM0
i dalje upisujes kao na linku
(ono ispod 'Changing speaker volume' mislim da nije bitno)

Probaj ovaj drajver : ltmodem-2.6-alk-8-patched2.tar.gz
http://www.murga-linux.com/puppy/viewtopic.php?p=128932&sid=b635985e458521d2496d9efb02dd7f6a#128932
Kod mene je jedini on proradio, a skinuo sam najmanje 20 drajvera.
Postupak instalacije je u /docs/example.txt i u README. Vodi racuna o redosledu prilikom kompajliranja.
Probaj, ne kosta te nista :)

Mozes ti to tacno da napises kako da instaliram ovaj driver? Skidao sam all ne razumem bas nista kako da sta da radim. Ne koristim dugo vremena linux sistem. Ako mozes molim te napisi ili tu na forum ili na moj e-mail adresu!? ???


slyder81@gmail.com

Nazalost, mislim da ti modem nece raditi  :-\ jer modem tj cipset je:


Agere SV2P cipset za koga pise:


Dakle imas kobojagi AGRSM drajvere za koje se ovde (http://"http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ReadMe.txt") kaze da rade samo na kernelu 2.6.18 i da kompajliranje ne moze da se odradi na novijim verzijama a i doticni su inace u alpha statusu sto ne pomaze previse  :(
Lucent modemi koji rade sigurno pod linux-om sa martian drajverima obicno WinXP prepoznaje kao Lucent Win Modem i nije potrebno instalirati dodatne drajvere pod Win-om-dakle rade odmah

Cim vidim to Agere prevrne mi se stomak uvek bar kada je linux u pitanju-zato sam ti i rekao prvo da odradis scan modem pa da prvo vidimo da li je uopste podrzan modem,da se ne mucis za dzabaka  ;)
Sta da ti kazem-losa sreca  :-\
Ako hoces-mozes svoj modem da zamenis negde ili sa neki drugarom koji koristi samo Windoze za Connexant(HCF i HSP)te Intel(536 i 537 EP)ili Smartlink za koje drajveri postoje  ;)

http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/

nego ,zagledajte malo bolje imena datoteka u folderu ?

kaze da treba da funkcionise za kernel 2.6.20   =  ubuntu 7.04

http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/2.16.20.tar.bz2
ili ovaj ovde
http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/agrsm-ubuntu-2.6.20-16-generic.tar.gz

Sa druge strane procitaj sta pise u prilozenom readme-ju na linku koji si sam dao  ;)


 ^-^

Nisam ni ja neki strucnjak za linux, ali valja malo cesljati po internetu. Nikad se ne zna. Nisam nikada video Ubuntu, niti znam o njemu. Ja koristim Vector, a on ima kernel 2.6.18. Osim toga imam Agere koji je malo stariji, a koji se nekad zvao Lucent, ali ga linux prijavljuje kao Agere. Da ne komplikujem, kada sam ja trazio drajver, negde sam naisao na podatak da noviji Agere uopste ne rade u linuxu. Ipak, napisacu ti kako sam ja instalirao ovaj koji sam ti predlozio, jer znam kako sam se ja mucio dok ga nisam namestio da radi :biggrin:
Nadam se da cu da pogodim, posto sam to poodavno instalirao  :), pa neka me neko ispravi ako slucajno negde pogresim, jer, koliko vidim ima ovde ljudi koji dosta znaju o linuxu (i meni su pomogli par puta, poz ovom prilikom :)/.

Ovako
Sve radi kao root
-Prvo deinstaliraj i obrisi prethodni drajver za modem ako je mozda instaliran/make uninstall, pa onda make clean/
-napravi direktorijum naziva "modules" u /usr/src, znaci treba da bude ovako /usr/src/modules
-kopiraj tu drajver i raspakuj ga, zatim udji u taj direktorijum u skoljci, terminalu ili kako ga vec zoves,

cd /usr/src/modules/ltmodem-2.6-alk-8-patched2

 znaci u terminalu treba da izgleda ovako:

/usr/src/modules/ltmodem-2.6-alk-8-patched2

-otvori drugi terminal i kucaj:

mknod --mode=0660 /dev/ttyLTM0 c 62 64
chmod 777 /dev/ttyS0
ln -s /dev/ttyLTM0 /dev/modem

zatvori ovaj terminal i predji u prvi

- ovde smo stali
/usr/src/modules/ltmodem-2.6-alk-8-patched2
kucaj:
make clean

make

ls -l *.ko
treba da dobijes ova dva fajla
ltmodem.ko
ltserial.ko

Napravi direktorijum "ltmodem" u /lib/modules/2.6.6(ovde pises tvoj, npr kod mene je 2.6.18.5)/, mozes ovako,

mkdir /lib/modules/2.6.6(ovde pises tvoj, npr kod mene je 2.6.18.5)/ltmodem

a mozes i u grafickom okruzenju, kako ti je lakse

-u "ltmodem" iskopiraj ltmodem.ko i ltserial.ko

cp *.ko  /lib/modules/2.6.6(ovde pises tvoj, npr kod mene je 2.6.18.5)/ltmodem
/ova komanda ti vazi ako se nalazis u /usr/src/modules/ltmodem-2.6-alk-8-patched2/

zatvori terminal

-otvori terminal i kucaj
cd /lib/modules/2.6.6(ovde pises tvoj, npr kod mene je 2.6.18.5)/ltmodem
# depmod -a.
# modprobe ltserial
# lsmod

zatvori i ovaj terminal

- edituj  /etc/modprobe.conf i dodaj sledece linije na kraju
alias /dev/modem ltserial
alias char-major-62 ltserial
alias /dev/tty/LTM0 ltserial

snimi, izadji.

Restartuj racunar i uloguj se kao root. Ako je to to, onda bi trebalo da radi.  E sad ne znam sta ti imas kde, xfce, ili sta vec. Ja imam xfce i chastnut dialer. Ako imas kde u kppp mozes da proveris da li radi modem, nadam se da znas vec kako. Uglavnom u dial device treba da ti stoji /dev/modem. Ako znas da radis sa wvdial, mozes i tako.

E sad...mozda neces moci da koristis internet kao user, ali to je lako resiti, pa onda ako ti je provajder 042 ne verujem da ces da imas vezu. Ja je nisam imao, pa sam se registoravo kod ptt. Ali o tom potom...muke zive :).  Vidi prvo da li ti radi taj Agere.

Izvini ako je ovo objasnjenje malo "indijanski", ali to ti je to u principu  :) i da te podsetim samo obrati paznju kada kucas u skoljci na svaki znak, a posebno na razmak, jer tu covek lako previdi. Pa srecno

Opet imam probleme.
Ne mogu da kopiram raspakovan drajver direkno u  /usr/src/modules. Kako treba da upisem u root terminal da kopira driver folder tamo? :-\

Moras to da radis kao root.
kucaj 'su'

Eeee...moram malo da te izkritikujem. Ja mislio ti instalirao vec i sad picis po internetu :). Ipak moras da znas neke osnovne, najosnovnije, stvari u linuxu. Imas dobrih tutoriala u .pdf-u. Skini neki pa malo citaj. Ja sam na taj nacin saznao prilicno o linuxu, a veruj mi mnogo moze tako da se nauci, pa onda po forumimima, pa man stranice. Samo na ovom forumu imas gomilu stvari, a kamoli ceo net. Necu vise da ti popujem, al' malo vise truda ne bi ti bilo naodmet. Jer sam primetio da ljudi i nisu ponekad zainteresovani da ti pomognu, ako vide da hoces sve na gotovo, a vidi se to veruj. Kad budes malo vise usao u sve to videces i sam :)

Ne mogu da ti napisem komandu za terminal, jer ne znam gde ti se nalazi download drajvera, ali ne moras to da radis iskljucivo iz terminala /mislim na kopiranje/. Mozes da koristis i neki fajl menadzer, a sigurno imas makar jedan, sa ovlascenjima za root! A obicno ti pise pored naziva u zagradi (root). Npr. kod mene je fajl menadzer Thunar, a sa ovlascenjima za root, Thunar (root).  Klikni na drajver /mozes i raspakovani/ COPY, idi u usr/src/modules, klikni PASTE. Kao sto bi radio i u windows-u. Ma samo opusteno!To je samo komp i operativni sistem /dobar O0/. Pa sta i ako ga nesto zaj....Instaliraj ga ponovo :biggrin: Ako ne smes nista da pipnes ne mozes ni da naucis. Bitno je da sacuvas podatke na nekom disku ili usb /dokumenta, slike, postu...i sl/, a ostalo sve moze ponovo. Bolje je kad ne mora, ali moze :)

Ili kao sto ti je LYb rekao, koristi naredbu "su" u terminalu, onda ces morati da uneses password, i pichi.
U SVAKOM SLUCAJU TI SVE TO MORAS DA  RADIS KAO ROOT..

Ne znam kako da ti drugacije objasnim.
 
Pozdrav.

Ne bi da ispadam partibrejker ali mislim da je covek vec digao ruke  :D
Meni se biti drago ako me neko demantuje  :)
Inace taj drajver(ltmodem-2.6-alk-8)koji si mu ti dao i preprocujes je praistorija(ja mislim da sam doticni koristio svojevremeno na Mandrake 10.0 pre skoro 3 godine  ::) )
Svezi drajveri se odazivaju na martian i agrsm i daleko su jednostavniji za instaliranje i namestanje nego ovi stari satrapi  ^-^
Dakle mani se bakraca i skini agrsm drajver koji ti lepo spomenut u scanmodem skripti



Dakle-jedina opcija koja mu preostaje je da proba agrsm drajvere http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ a i veliko je pitanje hoce li mu modem uopste raditi sto se lepo moze videti/procitati iz readme-ja na prilozenom linku
Nista brate-skini,procitaj readme koji ces dobiti sa njim,drzi palceve i nadaj se najboljem O0

Ako je digao ruke, to je njegovo. Ja sam pokusao da mu pomognem, jer kao sto sam rekao, ja sam bio na pragu da odustanem od svega iz razloga sto nisam mogao da pokrenem modem. Znaci ja tu nemam nikakvu korist. Znam i ja i za martian i za agrsm i novije i najnovije... Oni su vec predlozeni. Ja sam mu dao samo jos jedan predlog /koji kod mene odlicno radi/. Kao sto rekoh, skinuo sam ih najmanje 20. Instalacija nije uopse komplikovana. Traje 2 minuta. Ne kosta nista da proba. I ja ovo ne dozivaljavam kao party. Kod nekog upali ovaj, kod nekog onaj, kod nekog nijedan...ali....................................................................

Nisam stigao da procitam sve do kraja, ali cim sam video ltmodem i 2.6 kernel, odmah sam se setio Lucent DSP modema sa Mars chipsetom. Ja sam posle brdo neuspeha sa ltmodem driverom presao na martian, i evo kod mene srecno trci jos od 2.6.11 vanila kernela pa do sadasnjeg 2.6.23.8-63.fc8 fedora tvikovanog. Evo ga link, a sve sto treba da se uradi je da se procita INSTALL, a posle instalacije modem crpi maksimum iz parice  ;)

http://martian.barrelsoutofbond.org/index.html (http://martian.barrelsoutofbond.org/index.html)

Ko ga proba nece se pokajati  :cool:

Slazem se za Martian-radi odlicno(meni radilo na SUSE 10.2,Fedori 7 i Debianu Etch bez problema ;))ali ti drajveri su namenjeni kao sto si sam rekao za DSP Mars cipset dok je ovde u pitanju 048c SV2P za koga treba da se koriste agrsm drajveri  ^-^

Nisam imao vremena, al sad cu reinstalirati Ubuntu pa videcu. Javim ako ima nesto. Ako bas ne ide probacu na suse 10.2.  :cool:

evo reinstalirao sam al nista dobro. Kd sam ukucao make all to je izasao:



main.c:530: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:533: warning: implicit declaration of function ‘printf’
main.c:533: warning: incompatible implicit declaration of built-in function ‘printf’
main.c:538: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:541: warning: incompatible implicit declaration of built-in function ‘exit’
main.c:544: error: ‘optind’ undeclared (first use in this function)
main.c:544: warning: comparison between pointer and integer
main.c:545: error: array subscript is not an integer
main.c:545: warning: assignment from incompatible pointer type
main.c:547: warning: comparison between pointer and integer
main.c:548: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:554: warning: comparison between pointer and integer
main.c:554: warning: comparison between pointer and integer
main.c:556: error: ‘optopt’ undeclared (first use in this function)
main.c:557: warning: comparison between pointer and integer
main.c:557: warning: passing argument 1 of ‘optslot’ makes integer from pointer without a cast
main.c:557: error: ‘struct <anonymous>’ has no member named ‘has_arg’
main.c:558: warning: incompatible implicit declaration of built-in function ‘fprintf’
main.c:558: warning: passing argument 1 of ‘optslot’ makes integer from pointer without a cast
main.c:558: error: ‘struct <anonymous>’ has no member named ‘name’
main.c:558: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:558: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘const struct <anonymous> *’
main.c:565: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:566: warning: comparison between pointer and integer
main.c:566: warning: comparison between pointer and integer
main.c:569: warning: comparison between pointer and integer
main.c:569: warning: passing argument 1 of ‘optslot’ makes integer from pointer without a cast
main.c:569: error: ‘struct <anonymous>’ has no member named ‘has_arg’
main.c:570: warning: incompatible implicit declaration of built-in function ‘fprintf’
main.c:570: warning: passing argument 1 of ‘optslot’ makes integer from pointer without a cast
main.c:570: error: ‘struct <anonymous>’ has no member named ‘name’
main.c:570: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:570: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘const struct <anonymous> *’
main.c:572: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:572: warning: format ‘%c’ expects type ‘int’, but argument 4 has type ‘const struct <anonymous> *’
main.c:574: warning: implicit declaration of function ‘strncmp’
main.c:574: error: array subscript is not an integer
main.c:575: warning: incompatible implicit declaration of built-in function ‘fprintf’
main.c:575: error: array subscript is not an integer
main.c:575: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:575: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘const struct <anonymous> *’
main.c:578: warning: incompatible implicit declaration of built-in function ‘fprintf’
main.c:578: error: array subscript is not an integer
main.c:578: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:578: warning: format ‘%s’ expects type ‘char *’, but argument 4 has type ‘const struct <anonymous> *’
main.c:579: warning: passing argument 1 of ‘fprintf’ discards qualifiers from pointer target type
main.c:330: warning: unused variable ‘options’
main.c: In function ‘setup_pin_timer’:
main.c:601: error: storage size of ‘ptyevent’ isn’t known
main.c:605: warning: implicit declaration of function ‘memset’
main.c:605: warning: incompatible implicit declaration of built-in function ‘memset’
main.c:605: warning: passing argument 3 of ‘memset’ makes integer from pointer without a cast
main.c:608: error: request for member ‘sigev_signo’ in something not a structure or union
main.c:608: error: ‘SIGRTMIN’ undeclared (first use in this function)
main.c:608: warning: statement with no effect
main.c:611: error: request for member ‘sigev_notify’ in something not a structure or union
main.c:611: error: ‘SIGEV_THREAD_ID’ undeclared (first use in this function)
main.c:611: warning: statement with no effect
main.c:612: error: request for member ‘_sigev_un’ in something not a structure or union
main.c:612: error: request for member ‘_tid’ in something not a structure or union
main.c:612: warning: statement with no effect
main.c:614: warning: implicit declaration of function ‘mtimer_create’
main.c:614: error: ‘CLOCK_REALTIME’ undeclared (first use in this function)
main.c:616: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:621: error: ‘mtimer_t’ has no member named ‘id’
main.c:621: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:622: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:625: warning: passing argument 3 of ‘memset’ makes integer from pointer without a cast
main.c:628: error: request for member ‘sigev_signo’ in something not a structure or union
main.c:628: warning: statement with no effect
main.c:629: error: request for member ‘sigev_notify’ in something not a structure or union
main.c:629: error: ‘SIGEV_SIGNAL’ undeclared (first use in this function)
main.c:629: warning: statement with no effect
main.c:636: error: ‘mtimer_t’ has no member named ‘id’
main.c:636: warning: passing argument 1 of ‘logerr’ from incompatible pointer type
main.c:640: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:601: warning: unused variable ‘ptyevent’
main.c: At top level:
main.c:645: error: expected specifier-qualifier-list before ‘uint8_t’
main.c:658: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘io_uart_msr’
main.c:659: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘io_uart_status’
main.c:663: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dp_dsp_status’
main.c:664: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dp_wDspRetrainState’
main.c: In function ‘monitor_state’:
main.c:717: error: ‘io_uart_msr’ undeclared (first use in this function)
main.c:717: error: ‘struct _state’ has no member named ‘io_uart_msr’
main.c:717: warning: implicit declaration of function ‘sprintf’
main.c:717: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:717: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:717: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:717: warning: implicit declaration of function ‘__STRING’
main.c:717: error: expected ‘)’ before string constant
main.c:717: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:717: error: ‘struct _state’ has no member named ‘io_uart_msr’
main.c:717: warning: statement with no effect
main.c:718: error: ‘io_uart_status’ undeclared (first use in this function)
main.c:718: error: ‘struct _state’ has no member named ‘io_uart_status’
main.c:718: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:718: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:718: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:718: error: expected ‘)’ before string constant
main.c:718: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:718: error: ‘struct _state’ has no member named ‘io_uart_status’
main.c:718: warning: statement with no effect
main.c:719: error: ‘struct _state’ has no member named ‘x_modem_state’
main.c:719: warning: comparison between pointer and integer
main.c:719: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:719: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:719: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:719: error: expected ‘)’ before string constant
main.c:719: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:719: error: ‘struct _state’ has no member named ‘x_modem_state’
main.c:719: warning: statement with no effect
main.c:720: error: ‘struct _state’ has no member named ‘x_modem_mode’
main.c:720: warning: comparison between pointer and integer
main.c:720: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:720: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:720: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:720: error: expected ‘)’ before string constant
main.c:720: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:720: error: ‘struct _state’ has no member named ‘x_modem_mode’
main.c:720: warning: statement with no effect
main.c:721: error: ‘struct _state’ has no member named ‘x_line_rate’
main.c:721: warning: comparison between pointer and integer
main.c:721: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:721: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:721: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:721: error: expected ‘)’ before string constant
main.c:721: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:721: error: ‘struct _state’ has no member named ‘x_line_rate’
main.c:721: warning: statement with no effect
main.c:722: error: ‘dp_dsp_status’ undeclared (first use in this function)
main.c:722: error: ‘struct _state’ has no member named ‘dp_dsp_status’
main.c:722: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:722: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:722: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:722: error: expected ‘)’ before string constant
main.c:722: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:722: error: ‘struct _state’ has no member named ‘dp_dsp_status’
main.c:722: warning: statement with no effect
main.c:723: error: ‘struct _state’ has no member named ‘io_app_tx_count’
main.c:723: warning: comparison between pointer and integer
main.c:723: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:723: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:723: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:723: error: expected ‘)’ before string constant
main.c:723: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:723: error: ‘struct _state’ has no member named ‘io_app_tx_count’
main.c:723: warning: statement with no effect
main.c:725: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:726: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:730: error: ‘struct _state’ has no member named ‘io_app_tx_bytes’
main.c:730: warning: comparison between pointer and integer
main.c:730: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:730: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:730: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:730: error: ‘io_app_tx’ undeclared (first use in this function)
main.c:730: error: expected ‘)’ before string constant
main.c:730: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:730: error: ‘struct _state’ has no member named ‘io_app_tx_bytes’
main.c:730: warning: statement with no effect
main.c:731: error: ‘struct _state’ has no member named ‘io_dte_tx_bytes’
main.c:731: warning: comparison between pointer and integer
main.c:731: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:731: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:731: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:731: error: ‘io_dte_tx’ undeclared (first use in this function)
main.c:731: error: expected ‘)’ before string constant
main.c:731: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:731: error: ‘struct _state’ has no member named ‘io_dte_tx_bytes’
main.c:731: warning: statement with no effect
main.c:732: error: ‘struct _state’ has no member named ‘io_dte_rx_bytes’
main.c:732: warning: comparison between pointer and integer
main.c:732: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:732: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:732: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:732: error: ‘io_dte_rx’ undeclared (first use in this function)
main.c:732: error: expected ‘)’ before string constant
main.c:732: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:732: error: ‘struct _state’ has no member named ‘io_dte_rx_bytes’
main.c:732: warning: statement with no effect
main.c:733: error: ‘struct _state’ has no member named ‘io_dce_tx_bytes’
main.c:733: warning: comparison between pointer and integer
main.c:733: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:733: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:733: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:733: error: ‘io_dce_tx’ undeclared (first use in this function)
main.c:733: error: expected ‘)’ before string constant
main.c:733: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:733: error: ‘struct _state’ has no member named ‘io_dce_tx_bytes’
main.c:733: warning: statement with no effect
main.c:734: error: ‘struct _state’ has no member named ‘io_dce_rx_bytes’
main.c:734: warning: comparison between pointer and integer
main.c:734: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:734: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:734: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:734: error: ‘io_dce_rx’ undeclared (first use in this function)
main.c:734: error: expected ‘)’ before string constant
main.c:734: warning: passing argument 2 of ‘sprintf’ makes pointer from integer without a cast
main.c:734: error: ‘struct _state’ has no member named ‘io_dce_rx_bytes’
main.c:734: warning: statement with no effect
main.c:736: warning: incompatible implicit declaration of built-in function ‘sprintf’
main.c:737: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c: In function ‘setup_pin_watcher’:
main.c:758: error: storage size of ‘timer_action’ isn’t known
main.c:760: error: request for member ‘sa_handler’ in something not a structure or union
main.c:760: warning: statement with no effect
main.c:761: error: request for member ‘sa_flags’ in something not a structure or union
main.c:761: warning: statement with no effect
main.c:762: warning: implicit declaration of function ‘sigemptyset’
main.c:762: error: request for member ‘sa_mask’ in something not a structure or union
main.c:763: warning: implicit declaration of function ‘sigaction’
main.c:763: error: ‘SIGRTMIN’ undeclared (first use in this function)
main.c:758: warning: unused variable ‘timer_action’
main.c:766:19: error: errno.h: No such file or directory
main.c: At top level:
main.c:769: error: expected ‘)’ before ‘*’ token
main.c: In function ‘main’:
main.c:837: error: ‘struct _config’ has no member named ‘syslog’
main.c:840: error: ‘struct _config’ has no member named ‘daemon’
main.c:841: warning: implicit declaration of function ‘daemon’
main.c:841: error: ‘struct _config’ has no member named ‘logfile’
main.c:843: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:844: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:845: error: ‘struct _config’ has no member named ‘daemon’
main.c:845: warning: statement with no effect
main.c:848: error: ‘struct _config’ has no member named ‘daemon’
main.c:848: error: ‘struct _config’ has no member named ‘logfile’
main.c:849: error: ‘struct _config’ has no member named ‘syslog’
main.c:849: warning: statement with no effect
main.c:852: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:862: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:871: warning: implicit declaration of function ‘snprintf’
main.c:871: warning: incompatible implicit declaration of built-in function ‘snprintf’
main.c:874: warning: incompatible implicit declaration of built-in function ‘snprintf’
main.c:878: warning: incompatible implicit declaration of built-in function ‘snprintf’
main.c:880: warning: implicit declaration of function ‘strlen’
main.c:880: warning: incompatible implicit declaration of built-in function ‘strlen’
main.c:885: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:888: error: ‘struct _config’ has no member named ‘misr’
main.c:888: error: incompatible type for argument 1 of ‘misr_str’
main.c:888: error: ‘struct _config’ has no member named ‘realtime’
main.c:888: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:909: warning: passing argument 2 of ‘mthread_create’ discards qualifiers from pointer target type
main.c:910: warning: passing argument 1 of ‘logerr’ from incompatible pointer type
main.c:913: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:924: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:928: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:933: warning: implicit declaration of function ‘mkfifo’
main.c:934: error: ‘errno’ undeclared (first use in this function)
main.c:934: error: ‘EEXIST’ undeclared (first use in this function)
main.c:935: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:937: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:940: error: ‘FILE’ undeclared (first use in this function)
main.c:940: error: ‘control’ undeclared (first use in this function)
main.c:940: error: invalid operands to binary *
main.c:940: warning: statement with no effect
main.c:943: warning: implicit declaration of function ‘fopen’
main.c:943: warning: statement with no effect
main.c:944: error: ‘EINTR’ undeclared (first use in this function)
main.c:950: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:951: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:958: warning: implicit declaration of function ‘get_cmd’
main.c:961: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:962: warning: implicit declaration of function ‘fclose’
main.c:964: warning: statement with no effect
main.c:971: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:972: warning: passing argument 1 of ‘logwarn’ from incompatible pointer type
main.c:978: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:984: error: ‘__u32’ undeclared (first use in this function)
main.c:984: error: expected expression before ‘)’ token
main.c:984: error: invalid operands to binary *
main.c:984: error: called object ‘<erroneous-expression>’ is not a function
main.c:984: error: assignment of read-only location
main.c:984: error: incompatible types in assignment
main.c:984: warning: statement with no effect
main.c:985: error: ‘__u16’ undeclared (first use in this function)
main.c:985: error: expected expression before ‘)’ token
main.c:985: error: invalid operands to binary *
main.c:985: error: called object ‘<erroneous-expression>’ is not a function
main.c:985: error: assignment of read-only location
main.c:985: error: incompatible types in assignment
main.c:985: warning: statement with no effect
main.c:992: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:993: warning: implicit declaration of function ‘ioctl’
main.c:993: warning: implicit declaration of function ‘_IO’
main.c:995: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:999: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:1002: warning: passing argument 2 of ‘logsyserror’ from incompatible pointer type
main.c:1005: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:1013: warning: implicit declaration of function ‘pause’
main.c: In function ‘serve_port’:
main.c:1029: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:1031: error: ‘struct _config’ has no member named ‘realtime’
main.c:1041: warning: passing argument 1 of ‘logerr’ from incompatible pointer type
main.c:1042: warning: incompatible implicit declaration of built-in function ‘exit’
main.c:1047: warning: passing argument 1 of ‘logerr’ from incompatible pointer type
main.c:1050: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c:1055: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c: In function ‘mexit’:
main.c:1082: error: ‘struct _config’ has no member named ‘daemon’
main.c:1083: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:1085: warning: passing argument 1 of ‘loginfo’ from incompatible pointer type
main.c:1086: warning: incompatible implicit declaration of built-in function ‘exit’
main.c: In function ‘kbdint_handler’:
main.c:1093: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c: In function ‘setup_kbd_interrupt’:
main.c:1098: error: storage size of ‘timer_action’ isn’t known
main.c:1100: error: request for member ‘sa_handler’ in something not a structure or union
main.c:1100: warning: statement with no effect
main.c:1101: error: request for member ‘sa_flags’ in something not a structure or union
main.c:1101: warning: statement with no effect
main.c:1102: error: request for member ‘sa_mask’ in something not a structure or union
main.c:1103: error: ‘SIGINT’ undeclared (first use in this function)
main.c:1098: warning: unused variable ‘timer_action’
main.c: In function ‘sigterm_handler’:
main.c:1107: warning: passing argument 2 of ‘logdebug’ from incompatible pointer type
main.c: In function ‘setup_daemon_signals’:
main.c:1112: error: storage size of ‘timer_action’ isn’t known
main.c:1114: error: request for member ‘sa_handler’ in something not a structure or union
main.c:1114: warning: statement with no effect
main.c:1115: error: request for member ‘sa_flags’ in something not a structure or union
main.c:1115: warning: statement with no effect
main.c:1116: error: request for member ‘sa_mask’ in something not a structure or union
main.c:1117: error: ‘SIGTERM’ undeclared (first use in this function)
main.c:1112: warning: unused variable ‘timer_action’
main.c: In function ‘setup_segv’:
main.c:1124: error: storage size of ‘action’ isn’t known
main.c:1126: error: request for member ‘sa_handler’ in something not a structure or union
main.c:1126: warning: statement with no effect
main.c:1127: error: request for member ‘sa_flags’ in something not a structure or union
main.c:1127: warning: statement with no effect
main.c:1128: error: request for member ‘sa_mask’ in something not a structure or union
main.c:1129: error: ‘SIGSEGV’ undeclared (first use in this function)
main.c:1124: warning: unused variable ‘action’
main.c: In function ‘segv_handler’:
main.c:1133: error: storage size of ‘action’ isn’t known
main.c:1136: warning: incompatible implicit declaration of built-in function ‘printf’
main.c:1138: error: request for member ‘sa_handler’ in something not a structure or union
main.c:1138: error: ‘SIG_DFL’ undeclared (first use in this function)
main.c:1138: warning: statement with no effect
main.c:1139: error: request for member ‘sa_flags’ in something not a structure or union
main.c:1139: warning: statement with no effect
main.c:1140: error: request for member ‘sa_mask’ in something not a structure or union
main.c:1141: error: ‘SIGSEGV’ undeclared (first use in this function)
main.c:1133: warning: unused variable ‘action’
make[1]: *** [main.o] Error 1
make[1]: Leaving directory `/home/slyder/martian-full-20071011/modem'
make: *** [install] Error 2