Linuxo Forumi

==============================================================================
============================= ADSL Configuration =============================
==============================================================================
Your modem has to be plugged before proceeding.
You can stop this script anytime with [Ctrl][c]

Choose a network configuration :
_______________________________________________________________________
 . . . Country. . . Network. . . . . . . . . VPI VCI ENC
-----------------------------------------------------------------------
AT01 : Austria      ????                     01  20  06  PPPoA VC
BE01 : Belgique     Belgacom, Tiscali.be     08  23  06  PPPoA VC
BR01 : Brasil       Speedy/Telefonica        08  23  01  PPPoE LLC
BR02 : Brasil       Velox/Telemar            00  21  01  PPPoE LLC
BR03 : Brasil       Turbo/Brasil Telecom     00  23  01  PPPoE LLC
BR04 : Brasil       Rio Grande do Sul (RS)   01  20  01  PPPoE LLC
BG01 : Bulgaria     BTK POTS                 00  23  01  PPPoE LLC
BG02 : Bulgaria     BTK ISDN                 01  20  01  PPPoE LLC
DK01 : Denmark      ????                     00  65  03  Routed IP LLC
DE01 : Deutschland  DT (D.Telecom, 1&1...)   01  20  01  PPPoE LLC
ES01 : Espa  Telefonica               08  20  01  PPPoE LLC
ES02 : Espa  Telefonica               08  20  03  Routed IP LLC
ES03 : Espa  Retevision, Eresmas...   08  23  06  PPPoA VC
ES04 : Espa  Tiscali                  01  20  ??  ????
FI01 : Finland      Sonera                   00  64  03  Routed IP LLC
FR01 : France       FT (Free, Wanadoo...)    08  23  06  PPPoA VC
FR02 : France       FT (Free, Wanadoo...)    08  23  01  PPPoE LLC
FR03 : France       Tiscali 128k             08  23  05  PPPoA LLC
FR04 : France       Free d  08  24  04  Routed IP VC
FR05 : France       9online d  08  23  06  PPPoA VC
FR06 : France       Club-internet, t  08  23  06  PPPoA VC
FR07 : France       Tiscali.fr 512k          08  23  06  PPPoA VC
GR01 : Greece       ????                     08  23  06  PPPoA VC
HU01 : Hungary      Matav                    01  20  01  PPPoE LLC
IE01 : Ireland      ????                     08  23  01  PPPoE LLC
IT01 : Italia       Telecom Italia, Tiscali  08  23  06  PPPoA VC
IT02 : Italia       MClink                   08  4B  ??  ????
IT03 : Italia       Telecom Italia office    08  23  03  Routed IP LLC
NL01 : Netherlands  KPN                      08  30  06  PPPoA VC
PL01 : Polska       Telekomunikacja Polska   00  23  06  PPPoA VC
PL02 : Polska       TPSA                     00  35  01  PPPoE LLC
PT01 : Portugal     PT                       00  23  01  PPPoE LLC
SE01 : Sweden       Telia                    08  23  01  PPPoE LLC
CH01 : Switzerland  ????                     08  35  03  Routed IP LLC
CH02 : Switzerland  BlueWin (Swisscom)       08  23  05  PPPoA LLC
UK01 : UK           BT (Tiscali...)          00  26  06  PPPoA VC
-----------------------------------------------------------------------

#POTS FOR EAGLE
OPTN0=80020066
OPTN4=00000000

#Enable OPTN16 for WT-062 testing only
#OPTN16=80818040
VPI=00000000
VCI=00000035
#Note that the following value for encapsulation is in hex and define
#values in Konst.h are decimal. For example value for PPPOA_VC in
#header file is 6 decimal which is 6 in Hex, therefore if we want to use
#PPPOA_VC then we should put 6 in the following line for Encapsulation
#The following values are valid for encapsulation :
#MPOA_MODE_BRIDGED_ETH_LLC ----> 1
#MPOA_MODE_BRIDGED_ETH_VC  ----> 2
#MPOA_MODE_ROUTED_IP_LLC   ----> 3
#MPOA_MODE_ROUTED_IP_VC    ----> 4
#MPOA_MODE_PPPOA_LLC       ----> 5
#MPOA_MODE_PPPOA_VC        ----> 6
Encapsulation=00000001
#You must set Linetype to 10 To be able to get CMV values from CMV text files
#If you set Linetype to anything other than 10 then driver gets CMVs from
#this file. And also if there is no CMV text file for any reason then
#driver gets CMVs from this file as well
Linetype=00000001
RatePollFreq=00000009
STATIC_IP=none
ISP=PL02
LANG=en
ASYNCHRONOUS_START=1

$ lsmod |grep -i eagle
eagle-usb             110916   2
usbcore                59148   1  [acm eagle-usb uhci]

$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:60:4C:F3:70:9A
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000

          RX bytes:0 (0.0 b)  TX bytes:168 (168.0 b)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:100 (100.0 b)  TX bytes:100 (100.0 b)

eth0      Link encap:UNSPEC  HWaddr 56-3F-02-00-56-3F-02-00-00-00-00-00-00-00-00-00
          inet addr:192.168.0.2  Bcast:192.168.0.255  Mask:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:1188 (1.1 Kb)

#POTS FOR EAGLE
#OPTN0=80020066
#OPTN4=00000000
#Enable OPTN16 for WT-062 testing only
#OPTN16=80818040
VPI=00000008
VCI=00000035
#Note that the following value for encapsulation is in hex and define
#values in Konst.h are decimal. For example value for PPPOA_VC in
#header file is 6 decimal which is 6 in Hex, therefore if we want to use
#PPPOA_VC then we should put 6 in the following line for Encapsulation
#The following values are valid for encapsulation :
#MPOA_MODE_BRIDGED_ETH_LLC ----> 1
#MPOA_MODE_BRIDGED_ETH_VC  ----> 2
#MPOA_MODE_ROUTED_IP_LLC   ----> 3
#MPOA_MODE_ROUTED_IP_VC    ----> 4
#MPOA_MODE_PPPOA_LLC       ----> 5
#MPOA_MODE_PPPOA_VC        ----> 6
Encapsulation=00000001
#You must set Linetype to 10 To be able to get CMV values from CMV text files
#If you set Linetype to anything other than 10 then driver gets CMVs from
#this file. And also if there is no CMV text file for any reason then
#driver gets CMVs from this file as well
Linetype=00000001
RatePollFreq=00000009
#STATIC_IP=none
#ISP=PL02
#LANG=en
#ASYNCHRONOUS_START=1

#***********************************************************************
#
# pppoe.conf
#
# Configuration file for rp-pppoe.  Edit as appropriate and install in
# /etc/ppp/pppoe.conf
#
# NOTE: This file is used by the pppoe-start, pppoe-stop, pppoe-connect and
#       pppoe-status shell scripts.  It is *not* used in any way by the
#       "pppoe" executable.
#
# Copyright (C) 2000 Roaring Penguin Software Inc.
#
# This file may be distributed under the terms of the GNU General
# Public License.
#
# LIC: GPL
# $Id: pppoe.conf,v 1.11 2005/08/09 02:49:12 dfs Exp $
#***********************************************************************

# When you configure a variable, DO NOT leave spaces around the "=" sign.

# Ethernet card connected to DSL modem
ETH='eth0'

# PPPoE user name.  You may have to supply "@provider.com"  Sympatico
# users in Canada do need to include "@sympatico.ca"
# Sympatico uses PAP authentication.  Make sure /etc/ppp/pap-secrets
# contains the right username/password combination.
# For Magma, use xxyyzz@magma.ca
USER='korisnicko_ime@medianis'

# Bring link up on demand?  Default is to leave link up all the time.
# If you want the link to come up on demand, set DEMAND to a number indicating
# the idle time after which the link is brought down.
DEMAND=no
#DEMAND=300

# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2;
# NOCHANGE=do not adjust.
DNSTYPE=SERVER

# Obtain DNS server addresses from the peer (recent versions of pppd only)
# In old config files, this used to be called USEPEERDNS.  Changed to
# PEERDNS for better Red Hat compatibility
PEERDNS=yes

DNS1=
DNS2=

# Make the PPPoE connection your default route.  Set to
# DEFAULTROUTE=no if you don't want this.
DEFAULTROUTE=yes

### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT

# How long pppoe-start waits for a new PPP interface to appear before
# concluding something went wrong.  If you use 0, then pppoe-start
# exits immediately with a successful status and does not wait for the
# link to come up.  Time is in seconds.
#
# WARNING WARNING WARNING:
#
# If you are using rp-pppoe on a physically-inaccessible host, set
# CONNECT_TIMEOUT to 0.  This makes SURE that the machine keeps trying
# to connect forever after pppoe-start is called.  Otherwise, it will
# give out after CONNECT_TIMEOUT seconds and will not attempt to
# connect again, making it impossible to reach.
CONNECT_TIMEOUT=30

# How often in seconds pppoe-start polls to check if link is up
CONNECT_POLL=2

# Specific desired AC Name
ACNAME=

# Specific desired service name
SERVICENAME=

# Character to echo at each poll.  Use PING="" if you don't want
# anything echoed
PING="."

# File where the pppoe-connect script writes its process-ID.
# Three files are actually used:
#   $PIDFILE       contains PID of pppoe-connect script
#   $PIDFILE.pppoe contains PID of pppoe process
#   $PIDFILE.pppd  contains PID of pppd process
CF_BASE=`basename $CONFIG`
PIDFILE="/var/run/$CF_BASE-pppoe.pid"

# Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much
# easier on CPU usage, but may not work for you.  It is safer to use
# "no", but you may want to experiment with "yes".  "yes" is generally
# safe on Linux machines with the n_hdlc line discipline; unsafe on others.
SYNCHRONOUS=no

# Do you want to clamp the MSS?  Here's how to decide:
# - If you have only a SINGLE computer connected to the DSL modem, choose
#   "no".
# - If you have a computer acting as a gateway for a LAN, choose "1412".
#   The setting of 1412 is safe for either setup, but uses slightly more
#   CPU power.
CLAMPMSS=1412
#CLAMPMSS=no

# LCP echo interval and failure count.
LCP_INTERVAL=20
LCP_FAILURE=3

# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
PPPOE_TIMEOUT=80

# Firewalling: One of NONE, STANDALONE or MASQUERADE
FIREWALL=STANDALONE

# Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode
# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
LINUX_PLUGIN=

# Any extra arguments to pass to pppoe.  Normally, use a blank string
# like this:
PPPOE_EXTRA=""

# Rumour has it that "Citizen's Communications" with a 3Com
# HomeConnect DSL Modem DualLink requires these extra options:
# PPPOE_EXTRA="-f 3c12:3c13 -S ISP"

# Any extra arguments to pass to pppd.  Normally, use a blank string
# like this:
PPPD_EXTRA=""


########## DON'T CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING
# If you wish to COMPLETELY overrride the pppd invocation:
# Example:
# OVERRIDE_PPPD_COMMAND="pppd call dsl"

# If you want pppoe-connect to exit when connection drops:
# RETRY_ON_FAILURE=no

................TIMED OUT
/usr/bin/pppoe-start: line 194: 2458 Terminated $CONNECT "$@" >/dev/null 2>&1

eth0: not found