Problem oko dial up modema
Dobrodošli, Gost. Molim vas prijavite se ili se registrujte.
Da li ste izgubili vaš aktivacioni e-mail?

Prijavite se sa korisničkim imenom, lozinkom i dužinom sesije

Linuxo Forumi

Stranice: [1] 2   Idi dole
  Štampaj  
Autor Tema: Problem oko dial up modema  (Pročitano 2053 puta)
0 članova i 1 posetilac pregledaju ovu temu.
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« poslato: 01 Децембар 2007, 19:34:46 »

Pozdrav.
Gde da nadem driver za modem agere systems PCI soft modem?
nigde ne mogu da nadem codec za mp3, DVD , mp4. Gde mogu to naci?
Unapred hvala. grin
Prijavi uredniku   Sačuvana
popac
Global Moderator
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1654



WWW
« Odgovor #1 poslato: 02 Децембар 2007, 14:00:02 »

Drajver se zove martian, pretraži ovaj forom s tim kriterijumom. Za ostalo takođe pretraži forum (multimedia)...
Prijavi uredniku   Sačuvana
dejanium
Hero Member
*****
Van mreže Van mreže

Poruke: 809


sangoma


« Odgovor #2 poslato: 02 Децембар 2007, 14:33:23 »

ili pogledaj ovde

www.ubuntu-rs.org

samo nemoj mnogo da se zadrzavas tamo, bice ti i ovde dobro  Afro  salim se, naravno.
« Poslednja izmena: 02 Децембар 2007, 15:01:15 od dejanium » Prijavi uredniku   Sačuvana

Uzdaj se u se i svoj openSuSE!
Gorankx
Jr. Member
**
Van mreže Van mreže

Pol: Muškarac
Poruke: 66



« Odgovor #3 poslato: 02 Децембар 2007, 18:36:23 »

Drajver imas ovde     http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
Skini martian-full-20071011.tar.gz Smiley
Prijavi uredniku   Sačuvana

Registered Linux user #459263.
GNU/Linux Mapa Srbije #98
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« Odgovor #4 poslato: 03 Децембар 2007, 16:18:52 »

Hvala na pomoc, nasao sam.ali izgleda da nisam toliko pametan da instaliram. embarassed  Ako neko zna da nudi pomoc, ja bi zamolio da to meni objasni kako to da instaliram na ubuntu 7.10. Huh?
Prijavi uredniku   Sačuvana
dukenukem_4d
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1368



« Odgovor #5 poslato: 03 Децембар 2007, 17:37:44 »

ovde je generalno za dial-up modeme sa ubuntu-om (bitno je dole 'Configure Connection to ISP' )
https://help.ubuntu.com/community/DialupModemHowto

konkretno za martian je na sledecoj stranici
lucent ali pomocu martian drajvera

da bi se ovo napravilo ,mislim da je potreban paket za kompajliranje
trebalo bi da se ono osnovno za kompajliranje nalazi na cd-u 7.10
posto pretpostavljam da trenutno nemas pristup netu direktno sa ubuntu-a
(ne znam bas tacno za ubuntu  ima valjda build-essentials ili tako nesto,
na  ubuntu-rs.org ima vise informacija)

ovde je u stvari
https://help.ubuntu.com/community/DialupModemHowto/FromSource
    build-essential    linux-headers-*odgovarajuci*
ali ne mora bas da se prati ovo 'from source' uputstvo ,jer je na 7.10
naj jednostavnije pomocu synaptic-a da se ova dva paketa instaliraju
kad pustis synaptic ,tamo u njemu pronadji source:cd i cekiraj ova dva paketa
i idi na apply,i posle toga kad njih instalira onda mozes da nastavis sa daljom
instalacijom ovih martian drajvera
« Poslednja izmena: 03 Децембар 2007, 17:46:04 od dukenukem4d » Prijavi uredniku   Sačuvana

ADSL 512 Slackware Srbija Psy linux notorrni_modem ali se teže instalira od oootranslit ња ња ња
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« Odgovor #6 poslato: 04 Децембар 2007, 19:25:38 »

=================
    Building
=================

In root directory run
$ make all

==================
   Installation
==================

In root directory run
$ su
# make install
Kod driver-a ovaj gornji text pise u install.txt fajlu.
Kad upisem u root directory ovo:
root@slyder-desktop:/home/slyder# make install

izbacuje sledeci text:
make: *** No rule to make target `install'.  Stop.

ili sam ja baksuz ili mozda nisam dobar driver skinuo!?
nasao sam martian-full-20071011.tar.gz, jel ovaj driver dobro je za ubuntu 7.10 (gutsy)kernel Linux 2.6.22-14-generic  GNOME 2.20.0?
 
Prijavi uredniku   Sačuvana
dukenukem_4d
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1368



« Odgovor #7 poslato: 04 Децембар 2007, 22:10:17 »

to je najnoviji drajver,valjda ce da radi na kernelu v2.6.22
nisam isprobavao ,probacu da na ubuntu forumu(globalnom) nadjem thread za ovo
jer obicno azuriraju vesti o tome da li ovi drajveri rade na novijim verzijama linuxa

kada odpakujes arhivu (desni klik pa 'unpack with packager' )
pojavice se pod-direktorijum u home direktorijumu koji se zove martian-full-20071011
(mislim da si vec odpakovao)

komanda 'make' ili 'make all'sluzi za kompiliranje drajvera
posto u uputsvu kaze da treba  make all onda
 
prvo predjes u ovaj poddirektorijum , pomocu
Kod:
cd /home/gde_se_vec_nalazi/martian-full-20071011
pa onda
Kod:
make all
posle ovoga ,posalji listing da bi videli da li je ispala neka greska ili je proslo
regularno(okaci ga kao prilog sa .txt ekstenzijom)

ako je bilo bez problema onda
za samu instalaciju treba da imas super-user privilegije
a to se na ubuntu postize kucanjem    'sudo'  ispred neke komande ,znaci:
Kod:
sudo make install

(posle ovoga ne znam tacno sta dalje,moram da pogledam ili da
javi ko je instalirao martian na nekom racunaru
ili da citamo dalje readme?)
« Poslednja izmena: 04 Децембар 2007, 22:13:02 od dukenukem4d » Prijavi uredniku   Sačuvana

ADSL 512 Slackware Srbija Psy linux notorrni_modem ali se teže instalira od oootranslit ња ња ња
Scytale
Metal Maniac
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1189



WWW
« Odgovor #8 poslato: 04 Децембар 2007, 23:51:44 »

Covek ima Agere-pitanje je da li ce modem uopste da mu radi jer nisu podrzani svi cipsetovi Azn
Treba prvo da odradis scan modem i da nam kazes sta ti je rekao/izbacio a ovde imas uputstvo kako se to radi http://linmodems.technion.ac.il/#scanModem  Wink
Drajver btw radi(jos sam koristio prethodnu verziju  Cheesy)sa novijim kernelima bez problema-recimo na  Fedori 7 koja ima 2.6.21 ako se ne varam
« Poslednja izmena: 04 Децембар 2007, 23:54:05 od Seleuk » Prijavi uredniku   Sačuvana

Power of simplicity

http://www.archlinux.org/
----------------------------------------
http://www.slackware-srbija.org/
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« Odgovor #9 poslato: 05 Децембар 2007, 15:32:05 »

koristio sam scenmodem.evo je rezultat:

             

      Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html
 Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
 scanModem update of:  2007-20-07
The modem symbolic link is /dev/modem -> ttySL0

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
 snd_atiixp_modem
snd_via82xx_modem
snd_intel8x0m


The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.


 Modem not detected though HDA card diagnostics, though not excluding
 a possible Conexant modem chip impervious to ALSA diagnostics.
 Proceeding through alternative possibilties.

Summary card and chipset information is in:
/proc/asound/cards:
 0 [V8235          ]: VIA8233 - VIA 8235
                      VIA 8235 with AD1980 at 0xe000, irq 18

/proc/asound/pcm:
00-01: VIA 8235 : VIA 8235 : playback 1 : capture 1
00-00: VIA 8235 : VIA 8235 : playback 4 : capture 1

 A copy of /proc/asound had been copied to Modem/ALSAslyder.tgz
USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:0d.0   11c1:048c   11c1:044c   Communication controller: Agere Systems V.92 56K WinModem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 00:0d.0 ----

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


There is candidate modem software.

 For candidate modem in PCI bus:  00:0d.0
   Class 0780: 11c1:048c Communication controller: Agere Systems V.92 56K WinModem
      Primary PCI_id  11c1:048c
 Support type needed or chipset:   Agere.SV2P
 


 Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux  code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
 continued maintenance is only initiated at the request of a major chipset buyer,
 or comparable sponsor. Several different  modem chipset types  are produced:
 with varying support under Linux.
 Device ID  Support        Name           Comment
 ---------  -------------  -----------    -----------------------------
 0480       serial drivers Venus           controller chipset 1673JV7
 0440-045d  martian        Mars/Apollo     DSP (digital signal processing) chipsets
 0462       none           56K.V90/ADSL Wildwire
 048d none                 SV2P            soft modem
 048(c or f) AGRSM         SV2P            soft modem
 0600       none           soft modem, very few in the field.
 0620       AGRSM          Pinball  soft modem, in some HP desktop PCs
 062(1-3)   none           SV92PP,Pinball  soft modem, in some HP desktop PCs

martian - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/kernel-2.6/martian/

AGRSM - At http://phep2.technion.ac.il/linmodems/packages/ltmodem/sv92/ Read Agrsm.txt
Read Agrsm.txt
-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2007-12-04 20:10 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:
ltmodem
ltmodem
--------- end modem support lines --------

Prijavi uredniku   Sačuvana
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« Odgovor #10 poslato: 05 Децембар 2007, 15:35:49 »

evo je kompéetan istall.txt

=================
    Building
=================

In root directory run
$ make all


==================
   Installation
==================

In root directory run
$ su
# make install


==============
   Running
==============

Load module and run martian_modem first.
# modprobe martian_dev
# martian_modem [Options] [Tty]

Now Tty is the name of the device file to represent your modem. You'll supply it to the dialer. /dev/ttySM0 if argument omitted. Left martian_modem running and start the dialer.

See options available
# martian_modem --help
 

==============
     Auto
==============

In scripts/ directory run automate.sh.
$ cd scripts/
$ ./automate.sh

You can supply the option to be passed to martian_modem on loading like
$ ./automate --mode 0660

See ./automate.sh --help for more options.


==============
    Notes
==============

'martian_modem' program is a crucial part of the driver. It should be running as long as you access the modem.

For technical reasons carrier status support is not available for the modem client. Configure dialer respectively. For wvdial add "Check Carrier = No" line to the configuration file.


x86_64 platform.
----------------

martian_modem is a 32-bit application. It can be built on x86_64 the way prescribed, but you need 32-bit development environment for that. Second option is to use binary built on i386.

To compile and install module only do
$ make -C kmodule/ modules
$ su
# make -C kmodule/ install

nesto sam uspeo al jos ne radi.evo i to dokle sam stigao

slyder@slyder-desktop:~$ cd /home/slyder/Munkaasztal/martian-full-20071011
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ make all
make -C kmodule/ modules
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C /lib/modules/2.6.22-14-generic/build M="/home/slyder/Munkaasztal/martian-full-20071011/kmodule"  modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.o
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c: In function ‘martian_isr’:
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:160: warning: value computed is not used
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c: In function ‘martian_add’:
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:660: warning: ‘deprecated_irq_flag’ is deprecated (declared at include/linux/interrupt.h:66)
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:660: warning: ‘deprecated_irq_flag’ is deprecated (declared at include/linux/interrupt.h:66)
/home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian.c:663: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/marsio.o
  CC [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/mfifo.o
  LD [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.mod.o
  LD [M]  /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.ko
make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C modem/ all
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
-e     CC       main.o
-e     CC       dumpers.o
-e     CC       log.o
-e     CC       session.o
-e     CC       mport.o
-e     CC       pty.o
-e     CC       sysdep.o
-e     CC       isr.o
-e     CC       smp.o
-e     CC       core_if.o
-e     CC       coresubst.o
-e     CC       link.o
-e     CC       tweakrelocsdynamic.o
-e     CC       coreadd.o
-e     CC       elf386tweakrelocs
-e     LD       marscore.o
-e     TWEAK    marscore.o
-e     LD       martian_modem
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ sudo make install
[sudo] password for slyder:
make -C kmodule/ install
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C /lib/modules/2.6.22-14-generic/build M="/home/slyder/Munkaasztal/martian-full-20071011/kmodule" modules_install
make[2]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
  INSTALL /home/slyder/Munkaasztal/martian-full-20071011/kmodule/martian_dev.ko
  DEPMOD  2.6.22-14-generic
make[2]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
if ! /sbin/modprobe -nq martian_dev ; then /sbin/depmod -a; fi
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/kmodule'
make -C modem/ install
make[1]: Entering directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
-e     LD       martian_modem.debug
-e     STRIP    martian_modem.debug
-e     STRIP    martian_modem.stripped
-e     INSTALL  /usr/sbin/martian_modem
-e     INSTALL  /usr/lib/debug/usr/sbin/martian_modem.debug
make[1]: Leaving directory `/home/slyder/Munkaasztal/martian-full-20071011/modem'
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$ modprobe martian_dev
slyder@slyder-desktop:~/Munkaasztal/martian-full-20071011$  martian_modem --help
Usage: martian_modem [Options] [TTY]
Options:
   --daemon             Run as daemon
   --log=FILE           Log to FILE
   --syslog             Use syslog for logging
   --realtime           Raise priority of threads to realtime
   --isr={kernel,core,user}     Use original isr or its implementations
                          `kernel' to serve irqs in kernel module by rewriten isr
                          `core' for original isr version linked into this program
                          `user' for low-level statistics and testing of rewriten isr
                          `kernel' is default
   --smp                True smp mode
   --user=<name>        Give tty ownership to user <name>
   --group=<name>       Change tty group to <name>
   --country=<country>
   --no-cdclose         Keep working with client when carrier lost.
   --hide-pty           Save pty from others as soon its open. Client should notify he's here writing to device. For callback feature.
   --debug=LEVEL        Enable debugging. LEVEL = 1..5
   --info countries     Print support info
   --help, --usage      Print this message
TTY is the file name to access the modem, /dev/ttySM0 by default

Prijavi uredniku   Sačuvana
dukenukem_4d
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1368



« Odgovor #11 poslato: 06 Децембар 2007, 21:20:19 »

ovako kompiliranje je izgleda dobro proslo Afro
sad je potrebno podesenje konekcije(postoje dialeri ,kppp wvdial gnome-ppp)
ali na ubuntu ,bez prethodne instalacije sa neta moze da se koristi ugradjeni:
start dial-up bez dodatnog softwera
(ovu stranicu snimi odmah jer je http-secure i kad se zatvori prozor browser je obrise)

otvori dve-tri konzole
prvo treba da se ucita drajver
 
Kod:
sudo modprobe martian_dev
zatim u drugoj,posebnoj konzoli
 
Kod:
sudo martian_modem

ovaj program treba da stalno radi u pozadini dok zelis da koristis modem
postoji opcija --daemonize ,ali prvo da ovako testiramo
bez dodatnih prametara default uredjaj koga napravi je    /dev/ttySM0 i ovo je potrebno u sledecem
koraku
ne znam tacno da li mu treba sudo?

nego jel moze da probamo pomocu
alternativnog nacina?
Kod:
sudo pppconfig
treba da znas : telefonski broj provajdera ,lozinku i /dev/ttySM0
i dalje upisujes kao na linku
(ono ispod 'Changing speaker volume' mislim da nije bitno)

Prijavi uredniku   Sačuvana

ADSL 512 Slackware Srbija Psy linux notorrni_modem ali se teže instalira od oootranslit ња ња ња
ivan_dj
Newbie
*
Van mreže Van mreže

Poruke: 10


« Odgovor #12 poslato: 07 Децембар 2007, 00:18:36 »

Probaj ovaj drajver : ltmodem-2.6-alk-8-patched2.tar.gz
http://www.murga-linux.com/puppy/viewtopic.php?p=128932&sid=b635985e458521d2496d9efb02dd7f6a#128932
Kod mene je jedini on proradio, a skinuo sam najmanje 20 drajvera.
Postupak instalacije je u /docs/example.txt i u README. Vodi racuna o redosledu prilikom kompajliranja.
Probaj, ne kosta te nista Smiley
Prijavi uredniku   Sačuvana
slyder
Newbie
*
Van mreže Van mreže

Poruke: 9


« Odgovor #13 poslato: 08 Децембар 2007, 18:42:46 »

Mozes ti to tacno da napises kako da instaliram ovaj driver? Skidao sam all ne razumem bas nista kako da sta da radim. Ne koristim dugo vremena linux sistem. Ako mozes molim te napisi ili tu na forum ili na moj e-mail adresu!? Huh?


slyder81@gmail.com
Prijavi uredniku   Sačuvana
Scytale
Metal Maniac
Hero Member
*****
Van mreže Van mreže

Pol: Muškarac
Poruke: 1189



WWW
« Odgovor #14 poslato: 08 Децембар 2007, 19:04:43 »

Nazalost, mislim da ti modem nece raditi  Undecided jer modem tj cipset je:

Citat
There is candidate modem software.

 For candidate modem in PCI bus:  00:0d.0
   Class 0780: 11c1:048c Communication controller: Agere Systems V.92 56K WinModem
      Primary PCI_id  11c1:048c
 Support type needed or chipset:   Agere.SV2P

Agere SV2P cipset za koga pise:

Citat
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux  code developer/maintainer is Soumyendu Sarkar. Support for a chipset and its
 continued maintenance is only initiated at the request of a major chipset buyer,
 or comparable sponsor. Several different  modem chipset types  are produced:
 with varying support under Linux.
 Device ID  Support        Name           Comment
 ---------  -------------  -----------    -----------------------------
 0480       serial drivers Venus           controller chipset 1673JV7
 0440-045d  martian        Mars/Apollo     DSP (digital signal processing) chipsets
 0462       none           56K.V90/ADSL Wildwire
 048d none                 SV2P            soft modem
 048(c or f) AGRSM         SV2P            soft modem
 0600       none           soft modem, very few in the field.
 0620       AGRSM          Pinball  soft modem, in some HP desktop PCs
 062(1-3)   none           SV92PP,Pinball  soft modem, in some HP desktop PCs

Dakle imas kobojagi AGRSM drajvere za koje se ovde kaze da rade samo na kernelu 2.6.18 i da kompajliranje ne moze da se odradi na novijim verzijama a i doticni su inace u alpha statusu sto ne pomaze previse  Sad
Lucent modemi koji rade sigurno pod linux-om sa martian drajverima obicno WinXP prepoznaje kao Lucent Win Modem i nije potrebno instalirati dodatne drajvere pod Win-om-dakle rade odmah

Cim vidim to Agere prevrne mi se stomak uvek bar kada je linux u pitanju-zato sam ti i rekao prvo da odradis scan modem pa da prvo vidimo da li je uopste podrzan modem,da se ne mucis za dzabaka  Wink
Sta da ti kazem-losa sreca  Undecided
Ako hoces-mozes svoj modem da zamenis negde ili sa neki drugarom koji koristi samo Windoze za Connexant(HCF i HSP)te Intel(536 i 537 EP)ili Smartlink za koje drajveri postoje  Wink
« Poslednja izmena: 08 Децембар 2007, 19:09:49 od Seleuk » Prijavi uredniku   Sačuvana

Power of simplicity

http://www.archlinux.org/
----------------------------------------
http://www.slackware-srbija.org/
Stranice: [1] 2   Idi gore
  Štampaj  
 
Prebaci se na: