Ukratko ne mogu da kopiram fajlove koje je generisao telefon, a sve ostalo se kopira bez problema..
A sad malcice detaljnije..
Nokia 6233
Nokia OS (znaci nije Symbian!)
V05.43 (poslednja verzija sw-a)
OMA DRM v1.0
Kingston SDC/1GB (memorijska kartica koju koristim)
CA-71 USB Data cable
(BT adapter nemam)
Slackware 11
Kernel 2.6.18
Ploca je starija i podrzava samo USB 1.1 standard.
E sad.. prikacim fon na usb.. i za sad je sve normalno..
# dmesg
...
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Nokia Model: Nokia 6233 Rev: 0000
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 2012161 512-byte hdwr sectors (1030 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 2012161 512-byte hdwr sectors (1030 MB)
sda: test WP failed, assume Write Enabled
sda: assuming drive cache: write through
sda:
sd 1:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
Osim ovog dela: "sda: test WP failed, assume Write Enabled". Ako zatreba jos:
# cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Nokia Model: Nokia 6233 Rev: 0000
Type: Direct-Access ANSI SCSI revision: 02
i
# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0421:0492 Nokia Mobile Phones
Bus 001 Device 001: ID 0000:0000
Jos i fstab:
$ cat /etc/fstab
...
/dev/sda /mnt/usb vfat defaults,noauto,rw,users 0 2
E sad, najzanimljiviji deo.. Sa kompa na telefon mogu kopiram bilo sta (java igre, aplikacije, slike, melodije, klipove).. A sa telefona na komp mogu kopiram sve fajlove koje nije generisao fon. Znaci, sve slike i video klipove koje sam napravio sa telefonom ne mogu da prekopiram, a sve ostalo sto sam skinuo preko GPRS/EGDE-a, dobio putem MMS-a, ili preneo sa nekog drugog telefona BT vezom itd. to moze da se iskopira bez problema..
To da ne moze da iskopira, se manifestuje na sledeci nacin: kopiram sliku npr.. ono kao krene i zakuje na 3% i tako stoji nekoliko minuta.. i onda izbaci gresku:
Cannot read source file "/mnt/usb/Images/Image000.jpg"
Input/output error (5)
a u medjuvremenu se desi (ovo se generise korak po korak vremenom kako se ono gore "muci")
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
sd 1:0:0:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 63309
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: device not accepting address 3, error -71
usb 1-1: reset full speed USB device using uhci_hcd and address 3
usb 1-1: device not accepting address 3, error -71
usb 1-1: USB disconnect, address 3
sd 1:0:0:0: SCSI error: return code = 0x00070000
end_request: I/O error, dev sda, sector 63501
sd 1:0:0:0: SCSI error: return code = 0x00070000
end_request: I/O error, dev sda, sector 63741
sd 1:0:0:0: SCSI error: return code = 0x00070000
end_request: I/O error, dev sda, sector 63381
sd 1:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sda, logical block 525
lost page write due to I/O error on sda
scsi 1:0:0:0: rejecting I/O to dead device
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
cdc_acm 1-1:1.1: ttyACM0: USB ACM device
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new driver cdc_ether
rndis_host 1-1:1.9: RNDIS init failed, -110
usb%d: unregister 'rndis_host' usb-0000:00:07.2-1, RNDIS device
unregister_netdevice: device usb%d/c73be400 never was registered
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
printing eip:
dd09b760
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: rndis_host cdc_ether usbnet cdc_acm usb_storage ipv6 ohci_hcd ehci_hcd nvidia snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss bt878 8139too mii snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm lirc_gpio snd_timer snd_page_alloc snd_mpu401_uart tuner snd_rawmidi snd_seq_device snd soundcore bttv video_buf firmware_class ir_common compat_ioctl32 i2c_algo_bit btcx_risc tveeprom videodev via686a hwmon v4l1_compat i2c_isa v4l2_common lirc_dev i2c_viapro i2c_core uhci_hcd shpchp xt_tcpudp xt_state via_agp ip_conntrack nfnetlink iptable_filter ip_tables x_tables nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs capability commoncap agpgart lp parport_pc parport pcspkr psmouse
CPU: 0
EIP: 0060:[<dd09b760>] Tainted: P VLI
EFLAGS: 00010286 (2.6.18 #1)
EIP is at usbnet_probe+0x300/0x480 [usbnet]
eax: 00000000 ebx: c73be680 ecx: dd0baf80 edx: dbfef480
esi: dd09bb50 edi: c73be680 ebp: c73be400 esp: c759deac
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 5174, ti=c759c000 task=c7277030 task.ti=c759c000)
Stack: c80e2800 ca480000 ffffff92 dd0ba700 ca04ff28 dd0ba740 c80e2800 ffffffed
c027a3e7 c80e2800 dd0baf80 ffffffed dd0bafac c027a1c8 c80e2800 dd0ba740
c80e2814 00000000 dd0bafac c02139d3 c80e2814 c80e2814 c759df28 c0213aa0
Call Trace:
[<c027a3e7>] usb_match_id+0x27/0x60
[<c027a1c8>] usb_probe_interface+0x58/0xb0
[<c02139d3>] driver_probe_device+0x53/0xa0
[<c0213aa0>] __driver_attach+0x0/0x70
[<c0213b0b>] __driver_attach+0x6b/0x70
[<c0212f58>] bus_for_each_dev+0x58/0x80
[<c01b1760>] kobject_add+0x60/0x100
[<c0213b25>] driver_attach+0x15/0x20
[<c0213aa0>] __driver_attach+0x0/0x70
[<c0213479>] bus_add_driver+0x69/0xa0
[<c0213f99>] driver_register+0x59/0x90
[<c027a4c3>] usb_register_driver+0x53/0xb0
[<dcfeb00f>] rndis_init+0xf/0x12 [rndis_host]
[<c0132f92>] sys_init_module+0xe2/0x160
[<c0102ee7>] syscall_call+0x7/0xb
Code: e3 5b 8b 0c 24 51 e8 d0 71 1d e3 8b 44 24 08 eb 90 8d 76 00 8d bc 27 00 00 00 00 8b 4c 24 34 51 53 ff d0 89 44 24 0c 8b 43 04 5f <f6> 40 04 20 5a 74 19 f6 85 d8 00 00 00 02 75 10 be 50 bb 09 dd
EIP: [<dd09b760>] usbnet_probe+0x300/0x480 [usbnet] SS:ESP 0068:c759deac
<3>scsi 1:0:0:0: rejecting I/O to dead device
FAT: unable to read inode block for updating (i_pos 8403)
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 493) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 494) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 495) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 496) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 497) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 498) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 499) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 500) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 501) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 502) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 503) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 504) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 505) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 506) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 507) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 508) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 509) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 510) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 511) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 512) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 513) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 514) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 515) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 516) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 517) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 518) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 519) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 520) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 521) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 522) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 523) failed
scsi 1:0:0:0: rejecting I/O to dead device
FAT: Directory bread(block 524) failed
Inace telefon ima 3 moda prenosa:
"Default" (to je ustvari da se koristi kao modem)
"Printer"
"Storage mode" (direktan pristup kartici)
I sad, ja ga kacim u Storage mode, i gore u poslednjem dmesg listingu, onaj srednji deo govori da se fon prebacio iz "Storage mode" u "Default"..
Dalje, ovaj postupak, na istoj masini al na Windows XP-u prolazi bez problema tj. mogu kopiram sve, tako da odbacujem mogucnost HW kvara..
I jos jedna zaniljivost.. Od ortaka sam pozajmio Card Reader, ubacim gore pomenutu karticu u njega.. i sve sljaka kako treba i pod Linuxom.. Znaci ludilo..
Uz pomoc java programcica: "FileExplorer", "MiniCommander", "MobyExplorer".. sam proverio dozvole gore pomenutih problematicnih slika i klipova, i ona su Readable/Writable (Read-Only i Hidden nije cekirano)..
I jos lista modula:
# lsmod
Module Size Used by
usb_storage 80064 0
ipv6 225248 8
ohci_hcd 18564 0
ehci_hcd 29192 0
nvidia 4703564 22
snd_seq_dummy 2948 0
snd_seq_oss 29056 0
snd_seq_midi_event 6016 1 snd_seq_oss
snd_seq 43856 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 42144 0
snd_mixer_oss 14976 1 snd_pcm_oss
bt878 8744 0
8139too 21632 0
mii 4992 1 8139too
snd_via82xx 22808 1
gameport 11144 1 snd_via82xx
snd_ac97_codec 86944 1 snd_via82xx
snd_ac97_bus 2176 1 snd_ac97_codec
snd_pcm 67720 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
lirc_gpio 9008 1
snd_timer 19460 2 snd_seq,snd_pcm
snd_page_alloc 7816 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6528 1 snd_via82xx
tuner 59560 0
snd_rawmidi 18848 1 snd_mpu401_uart
snd_seq_device 6540 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 42724 13 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7264 1 snd
bttv 160244 2 bt878,lirc_gpio
video_buf 19972 1 bttv
firmware_class 7424 1 bttv
ir_common 24452 1 bttv
compat_ioctl32 1280 1 bttv
i2c_algo_bit 8456 1 bttv
btcx_risc 4232 1 bttv
tveeprom 13584 1 bttv
videodev 22016 1 bttv
via686a 15624 0
hwmon 2452 1 via686a
v4l1_compat 12932 1 videodev
i2c_isa 3712 1 via686a
v4l2_common 19840 3 tuner,bttv,videodev
lirc_dev 12244 1 lirc_gpio
i2c_viapro 7700 0
i2c_core 16784 8 nvidia,tuner,bttv,i2c_algo_bit,tveeprom,via686a,i2c_isa,i2c_viapro
uhci_hcd 20748 0
shpchp 33052 0
xt_tcpudp 3328 7
xt_state 2048 1
via_agp 7936 1
ip_conntrack 40596 1 xt_state
nfnetlink 5272 1 ip_conntrack
iptable_filter 2432 1
ip_tables 11480 1 iptable_filter
x_tables 10756 3 xt_tcpudp,xt_state,ip_tables
nls_iso8859_1 4096 4
nls_cp437 5760 4
vfat 10240 4
fat 46108 1 vfat
nls_utf8 1920 1
ntfs 202644 1
capability 3464 0
commoncap 5504 1 capability
agpgart 28208 2 nvidia,via_agp
lp 9928 0
parport_pc 24260 1
parport 30152 2 lp,parport_pc
pcspkr 2560 0
psmouse 35464 0
Mislim da sam naveo sve sto je potrebno..
Ako se neko prvenstveno susreo sa slicnim problemom i/ili zna resenje problema neka obavezno javi. Ustvari postujte sta god vam padne napamet, da moze da zeza..
Hvala unapred na odgovorima..
